Characteristics & Properties
·Tube Diameter: 6.5mm-16mm
·Fined Diameter:13.5mm-30mm
·Tube Material: SS201, SS304, SS316, SS321 and INCOLOY800 etc
·Insulation Material: MgO
·Conductor Material: Ni80Cr20 or 0Cr25Al5
·Wattage Density: High/Middle/Low (5-25w/cm2)
·Lead Connection Option: Threaded Stud Terminal or Lead Wire
·Lead Wire Type: 300mm Standard (Teflon/Silicone High Temperature Fiberglass are available forelectric finned tubular element heating)
Heat intensity |
Not exceeding 30w/cm2 (advisable) |
Power |
Depends on the dimension |
Exhaust extreme (when cold) |
<=0.1mA to 242 v. |
Insulation (when cold) |
5 Min Ohms 500 Watts minimum |
Dielectric strength |
1500v. 1/sec |
Working temperature |
650 Deg C max. |
Length tolerance |
+/-1.5% |
Diameter tolerance |
-0.02 to -0.06 mm |
Cut off connection tolerance |
+/-15 mm |
Power tolerance (w) |
+5 % - 10 % |
Cold areas |
Depends on length and diameter 50-200mm |
Suggested Applications
·Forced air heating for dryers, ovens, ducts
·Still air heating for ovens, comfort heating
·Incubators
·Ink drying
·Load bank resistors
To Order
For electric finned tubular element heating, Size, Wattage and Voltage are available on request.
Please contact us with your special requirements. We are pleased to contact you if you would like more information or want to discuss custom product availability and pricing.
Welcome to order sample electric finned tubular element heating for initial evaluation.